¶Tools

AdonisFX includes several tools that allow for a smoother experience when interacting or configuring nodes and deformers. This page is intended to provide detailed explanation of the use, setup and application of each tool.

¶Paint Tool

The AdonisFX Paint Tool is meant to be used for the manipulation of the paintable attributes of the AdnSkin, AdnMuscle and AdnRibbonMuscle deformers. Its functionalities are very similar to the standard Maya paint tool functionalities plus the ability to paint attributes with multiple influences (e.g. attachment constraints) where a single vertex can adopt a different weight value for the same attribute driven by multiple influent external objects. Also, it ensures the normalization of dependent attributes like hard, soft and slide constraints in AdnSkin deformer.

The use of this tool is required for the correct setup of skin, muscle and ribbon muscle solvers. After every stroke, the internal logic processes the painted map and updates all dependent maps to keep the configuration of the solver safe. For example, if we paint the influence of one attachment of an AdnMuscle which has two attachments assigned, then the tool will update the weights of the other attachment to ensure that the addition of both is normalized at each vertex. The same applies if we paint hard constraints of an AdnSkin deformer: the soft and slide constraints maps will be updated internally to keep the addition of the three maps normalized. Thanks to this logic, switching attributes (see Figure 7) or selecting influences (see Figure 8) from the AdonisFX Paint Tool provides automatic feedback to the user of the current status of all the maps.

To open the tool:

1. Select the mesh with the AdonisFX deformer applied to.
2. Press the paint tool shelf button or go to AdonisFX Menu > Paint Tool.

If the selection provided is valid, meaning the selected mesh has one of the AdonisFX deformers listed before, then the paint context will get configured and the user can paint. The map to be painted is the one associated to the selected attribute in the enumerator exposed at the top of the UI.

The painted weights are visualized in the viewport thanks to the AdnWeightsDisplayNode. This node is in charge of setting the vertex colors from the selected attribute in the UI on the mesh. This node is created and removed dynamically by the Paint Tool on entering and exiting from the context. Because of that, it is strongly recommended to keep the AdonisFX Paint Tool open while painting.

Depending on the deformer and the attribute selected the UI can adjust to support multi-influence attributes by exposing the influences or restricting certain functionalities of the tool. In the following sections, the specific behavior of the tool for each deformer is presented.

Paint Tool on AdnMuscle and AdnRibbonMuscle

In the specific case of muscle deformers, the too will display the following attributes:

• Attachment Constraints

  • If this attribute type is selected, then a list widget is shown with the names of the attachments connected to the deformer (Figure 7).
  • Select the desired attachment to paint from the list widget and paint the weight values.
  • When selecting an attachment in the list, the object will also get selected in the scene, facilitating its identification.
  • If more than one attachment was added to the system, then the paint tool will normalize the weights automatically after a stroke has been completed, meaning that the sum of all attachment constraint weights in a vertex will always add up to a maximum value of 1.0.
  • If any attachment is removed or added to the system, then the paint tool will refresh the list on mouse hover over the UI.

  

• Tendons

  • It is recommended to paint values of 1.0 wherever the tendon tissue is and values of 0.0 in the rest of the mesh.
  • This painting will internally trigger an automatic estimation of fibers direction which can be displayed using the debug functionalities of the deformer.

• Fibers

  • When selecting the fibers attribute, the fibers debugger will automatically get enabled, displaying the muscle fibers.
  • The initial direction displayed will be the one estimated by tendon weights.
  • To modify the fibers direction, comb the fibers towards the desired direction.
  • For better precision adjust the set direction using the Smooth brush.
  • To get all fibers more tightly aligned in a homogeneous way, press the flood button while having the Smooth brush selected.

• Stretching and Compression Resistance

  • Stretching resistance is set to 1.0 by default. With this value, the solver will apply the corrections to the edges needed to keep the lengths at rest. Set values lower than 1.0 to linearly reduce the amount of correction applied by the solver when the edges get stretched.
  • Compression resistance is set to 1.0 by default. With this value, the solver will apply the corrections to the edges needed to keep the lengths at rest. Set values lower than 1.0 to linearly reduce the amount of correction applied by the solver when the edges get compressed.

• Global Damping

  • By default, this map is set to 1.0.
  • This value is scaled by the Global Damping Multiplier during simulation to control the amount of damping the solver will apply at each vertex.

• Slide on Segment Constraints

  • Slide on Segment Constraints operate similarly to attachment constraints, as they are both multi-influence attributes.
  • The entries in the list widget correspond in this case to the segments added to the constraint, with the name of the segment being "root_transform - tip_transform".
  • Select the desired segment to paint from the list widget and paint the weight values.
  • When selecting a segment in the list the two scene objects that form the root and tip of the segment will get selected as well, facilitating their identification.
  • If more than one segment was added to the system, then the paint tool will normalize the weights automatically after a stroke has been completed, meaning that the addition of all slide on segment constraint weights in a vertex will always add up to a maximum value of 1.0.

  

Paint Tool on AdnSkin

In the specific case of an AdnSkin deformer, the tool will display the following attributes:

• Hard Constraints
  • Hard constraints are set to 1.0 by default. With this value the solver will apply the corrections to the vertices needed to keep them at a constant transformation, local to the closest point on the reference mesh at initialization.
  • This value is normalized alongside Soft Constraints and Slide Constraints.
• Soft Constraints
  • Soft constraints are set to 0.0 by default. Modify this value to allow the solver to apply corrections to the vertices regarding the vertices keeping a constant distance to the closest point of the reference mesh.
  • This value is normalized alongside Hard Constraints and Slide Constraints.
• Slide Constraints
  • Slide constraints are set to 0.0 by default. Modify this value to allow the solver to apply corrections to the vertices regarding the sliding of the simulated mesh along the reference surface.
  • This value is normalized alongside Hard Constraints and Soft Constraints.
• Stretching and Compression Resistance
  • Stretching resistance is set to 1.0 by default. With this value, the solver will apply the corrections to the edges needed to keep the lengths at rest. Set values lower than 1.0 to linearly reduce the amount of correction applied by the solver when the edges get stretched.
  • Compression resistance is set to 1.0 by default. With this value, the solver will apply the corrections to the edges needed to keep the lengths at rest. Set values lower than 1.0 to linearly reduce the amount of correction applied by the solver when the edges get compressed.
• Sliding Distance Multiplier
  • Sliding distance Multiplier is set to 1.0 by default. With this value, every vertex of the geometry will be able to slide along every vertex of the reference surface.
  • It is suggested to lower the value in those areas where slide constraints are less relevant or not present for better performance without losing quality.
• Masses
  • Masses are set to 1.0 by default. This will mean that by default the solver will consider that the skin has a uniform mass.

¶Importer

The Importer allows the user to import the configuration for a specific deformer from a previously exported AAD file. It allows the user to easily configure a deformer from an already known setup which includes data like weight maps, connections and attribute values.

To open the importer tool press the shelf button or go to AdonisFX Menu > Import. To import and apply an ADD file to an entity in the current open scene with the deformer information follow these steps:

1. Locate the ADD file by going to Input File Path's folder button and select an AAD file from a directory.
2. Locate the available deformer names that were fetched from the AAD file on the left section of the tool ("Node" | "Node Type").
3. Locate the available nodes found in the current scene selection to which the AAD file configuration can be applied to ("Mesh" | "Candidate Node"). The selection can be redone and expanded by selecting elements from the scene and pressing the Add Selected button or can be cleared using the Clear button.
4. Select the deformer from which the AAD file data will be fetched in the left hand panel.
5. Select the node to which to apply the selected deformer configuration in the right hand panel.
6. Press the Assign button to temporarily assign the configuration to the target node. Or clear the assignment using Delete.
7. The assignments can then be imported using the Import button or everything can be cleared using the Clear All button.

After following the previous steps the tool will inform about the status of the import: if failed, only partial data could be imported or all data could be imported.

¶Exporter

The Exporter allows the user to export the configuration for a specific deformer into an AAD file. It allows the user to easily save a deformer configuration from an already existing setup containing data like weight maps, connections and attribute values.

To open the tool press the shelf button or go to AdonisFX Menu > Export. To export an ADD file from the current scene follow these steps:

1. If the tool had been opened on an already active selection containing an AdonisFX deformer the node will appear in the Select Export Data list. To add and remove a new selection press Add Selection or Clear.
2. Select, using the checkboxes, the deformers and the individual settings to export to the AAD file. For example selecting Maps and Attachments would export the painted attribute maps and the matrices for the attachments relative to an AdnMuscle or AdnRibbonMuscle deformer.
3. Define a name for the ADD file by going to Output File Path and selecting the folder icon.
4. Finally, pressing the Export button will generate the file in the designated location.

The AAD file that has been exported can then be imported in a scene with similar characteristics.

¶Sensors Connection Editor

To ease with the connection of sensors to deformers AdonisFX provides the Sensors Connection Editor in charge of facilitating the connection of sensors to the active deformers in the scene.

To use this tool go to the AdonisFX Menu > Sensors (under the Edit section) > Connection Editor.

Two main sections can be distinguished in this tool, labeled source and destination. In the source section the sensors and locators alongside their signal attributes will get displayed, while in the destination section the deformers alongside their possible input attributes will get displayed.

To retrieve these objects and display them in the tool, select the desired element from the scene (an AdonisFX locator containing a sensor or a deformer) and press their respective Reload Left or Reload Right button.

For Source elements (sensors) press the Reload Left button and for Destination elements (deformers) press the Reload Right button.

To make the connections select the two specific attribute to connect (one from source and one from destination) and press the Make Connection button. A message will then get displayed informing that the connection has been properly made.

To clear the selection and reset the tool to its initial state, press the Clear All button.